Kohlenbachbrücke: An (eastern) European diversion...

I blame Chris and Oly. It was their French H0 layout, photographs and the recent video that finally tipped me over the edge. European modelling, beyond narrow gauge, has always been a 'great unknown' to me, and overwhelmed by the variety and scope a topic I had given little serious thought to for my own modelling...


However... it was whilst watching Cessy-en-bois that a seed planted many years ago by the slightly European-esque Matchbox diesel germinated. The green shoots that followed whispering quietly 'what would a James Hilton European cameo look like?'. That thought was infectious and soon became a clamour for my attention. Diving into Flickr and eBay a weekend of rabbit holes allowed the resolution of that question. It would look like this:


Alongside the sketches and research some 'bargain' eBay purchases netted me a Liliput diesel for just over £50 and a further £80 had all the rolling stock I desired - a few hours with a jig saw and two sheets of 6mm MDF (and a little hardboard) and the cameo was built and 'testing' could begin. The track plan, tried and tested (from Pont-y-dulais) both familiar and necessary by the two 'medium' radius code 75 turnouts I had in stock - this is a 'quickie' and intended to be low cost - but I hope, with Kadee couplings, buried magnets and a reliable smooth running shunter, an accessible and mindful distraction.

The composition shown here is an unknown industry located 'somewhere' on the Austrian / Czech border in the early 1980s. Why? I've no idea really - I suppose Austria because of the OBB shunter (which will get HLB plates and a little weathering) and Czech, because I've a thing for the architecture. Just take a look at the industrial railways in Bratislava and you'll realise it's all 'utilitarian' design and concrete, so expect plenty of that in various states of decay. Expect also overgrown track, a pale sun bleached palette and plenty of industrial paraphernalia. The pipe bridge will form a deliberate view block across the FRONT of the scene, allowing framing of views through its support legs. Hands free (mostly - although I find the free running Roco and Klein rolling stock has magnetic axles - which I must address) operation should mean this isn't a problem. In addition, a tiny 'off stage' area is sufficient to swap out vehicles and store two wagons 'off the track' when not in use.

Operationally there are just two things to do - either swap the loaded van, or swap the unloaded tank wagon. The locomotive will be stabled infront of the office between playing, so operation always starts here before heading off stage to collect whichever I choose from the 'interchange'. If it's the van it's on the left of the locomotive (viewed from the front, open side) if it's the tank, it will be on the right. Swapping the stock over takes around 5 minutes. This sounds short to many of you I'm sure - but if I want a longer 'play' I can reach for Paxton Road or Beaverbrook. I miss Pont-y-dulais for its 2-3 minute playtime. Wrecsam is lovely, but only a minute or two - this project hopefully sits in the sweet spot between.


There are those who may think my butterfly mind stops me finishing anything - and others who are bewildered at the vast array of scales, interests, gauges and prototypes left in my wake - but those that feel the same love of model railways, who can tap into the distinct non-specific elements that drive our interest in particular prototypes will see again a run down and slightly worn out railway, a simple composition with limited operation, presented in an almost architectural cameo box. The parallels are what stitch these projects together, and I can't wait to see how this painting of a different, new and interesting scene develops in the coming months. 

Oh, and the name? A terrible play on the fact that this track plan is the same as Pont-y-dulais, and this layout sits on the shelf erected for that previous layout's home. If anyone can help with something similar but more appropriate then by all means let me know!

Until next time, more soon...


Donate
I love writing and creating material for the blog. If you enjoy what you read and engage with I would be appreciative of any donation, large or small, to help me keep it advert and restriction free.

Comments

  1. Hi James

    Your excursion into Europe looks very good and I imagine will give much enjoyment in construction and operation . Since you mention the "sweet" spot then perhaps it could be a sugar factory. Rail served ones seem more prevalent in Europe and some of those also had narrow gauge operations. A name might be "Zuckerfabrik Hilfondorf". The modelled section could be sugar in vans out and maybe molasses in tanks or tanks of fuel oil in

    I have also been following and agree with much of your "philosophical" discussion on the basis on modelling railways. It seems to me once we get away from just making a model of a particular loco or piece of rolling stock as a bit of miniature engineering then our modelling is all about making pictures and stories albeit with the potential to move our subjects around . This is some what like a painter or sculptor or other artist using their work to involve the viewer.
    I think you are lucky in being able to move from one subject to another. I am still trying to produce that impression of a railroad as I saw, and as I would have wanted to see, but within one layout. However you are aware occasionally I think of other pictures I want to have a model of

    Hope you are having a good weekend
    Best regards

    Alan

    ReplyDelete
    Replies
    1. Hi Alan, thanks for the comment. I’d considered sugar beat, but I think I’ll stick with a generic ‘unknown’ factory. I like the chlorine tank wagon I have, and I’ve got a fuel tank too - and the vans are pretty non descript so it’s just what I like really. I’ve been playing with the layout again today, and it’s probing to be as lovely to run as I’d hoped so I must get on with track painting next!

      Delete
  2. Very excited by this one and looking forward to seeing it develop!

    ReplyDelete
    Replies
    1. I enjoyed a few moments again before bed last night just shuffling the vans around. It strikes me that personally, the balance between operating ‘time’ and life is just about perfect. It’s long enough to breathe, yet short enough to consider starting in the first place.

      Delete
  3. In France, particularly on the outskirts of regional towns, you'd often find bits of old industrial railway infrastructure just left there in Industrial Estates that have been redeveloped around it and this, together with some of your earlier posts, reminds me much of these.

    Because of this, somewhere down the list of my many layout ideas lies the industrial siding of Etablissements Flaubert-Perroquet...

    ReplyDelete
    Replies
    1. Thank you John, and whilst I’m unfamiliar with your reference, I suspect there are others who will ‘get it’, I love the fact you’ve totally understood where I’m coming from with my story, and it’s helped form your own. Wonderful hobby isn’t it!

      Delete
  4. Hi James,
    I managed to miss this...largely because I was getting my own, rather larger, H0 effort https://schinkendorfh0.blogspot.com/ ready for the Wealden Railway Group show last Sunday.
    I wanted a quick project that would work for the interim period while most of my hobby stuff is in store; I knew I didn't want 00 (already got a load of stuff for EM but that's not quick) and I'd already bought a bunch of building kits and vehicles for H0 at (mostly) bargain prices. It's perhaps not so easy nowadays to pop in a model shop and pick up European RTR etc. as it used to be, but then there's the thrill of the chase I suppose!
    I decided to replace the horrible hook-and loop couplings, but went for Fleischmann Profi-Couplers as they work with the close coupling mounts fitted to most modern European stock. There's also no problem with magnetic axles, etc. I just need to sort out a hands-off method of uncoupling, though for home use it's not really a problem as I use the handle of a wooden spoon as supplied by take-away food outlets to good effect.
    Actually, I may well end up building something similar to Kohlenbachbrucke as I already have a Trix DHG500 in blue similar to the loco in the top L/H photo, and at the WRG show I acquired a Fireless!
    There's also a wide variety of wagons including many suitable for an industrial micro...
    Cheers,
    Simon.

    ReplyDelete
    Replies
    1. I’ve enjoyed digging into the new blog Simon, thank you for the link. I can whole heartedly recommend the Liliput diesel, this one was just £50 and runs beautifully. I’m actually selling one of the vans and a tank in EBay at the moment, the van is still at just 99p so perhaps a bargain? I’ll follow the blog, I’ve added it to my reading list. Take care, hope you’re well.

      Delete

Post a Comment

Thank you for leaving a comment on my blog - I appreciate you taking the time to share your views. If you struggle to log in, please turn off the ‘block cross-site tracking’ setting in your browser.

James.